Living Out Of Debt

In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They’re all considered naturally able to replenish – and thereby ‘Green’. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. Then we have the ancient energy of the Sun and the heat that comes from it – now called Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.

Solar Thermal Energy – By using different technologies, Solar Energy is effectively made up of two types of solar panels. As a first strategy, we have Solar Water Heating Collectors – which basically creates hot water from solar energy. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.

As a result, Solar Water Power is often considered the most common form of Solar Energy in the UK. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.

Systems Utilising Biomass Energy: This term encompasses all forms of natural products – such as plant and animal material. It is extremely useful – in that it can produce a range of power sources, including heat and electricity. The ability to generate electricity is one of the UK’s main green strengths – as it has one of the larger Biomass legacies within Europe. One of the main factors of this style of energy is the result without the impact on C02. With a new tree being planted as each is felled, you can see how the C02 produced during heating is minimised – and why the system is deemed sustainable.

To meet the need, fast growing trees, known as Short Rotation Coppice (SRC) are utilised. Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. However, waste derived from food or wood is another biomass entity – called Municipal Waste.

Geo-Thermal Energy Technology: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Although heat pumps require energy to function, their rate of return is superb – being a four-fold benefit over the energy put in. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.

Wind Energy – An Update On Old Technology: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. The UK is considered as one of the best sources of wind generation within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production – as opposed to the current value of only 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Due to this, we are looking at 6-9 months in total to cover the costs.

Finally, we have Hydropower; an area in which the UK does well within Europe. Just like a thousand years ago, we are utilising the energy from water. Interestingly enough, this type of energy production meets around 2 percent of the UK electrical total demand.

Using a turbine, a Hydropower system can transform the energy of water into other forms. The important thing is that, without having to rely on water storage, the turbines can generate electricity. ‘Micro-Hydro’ however, uses the dam and sluice systems that have been made redundant by the larger national distributions. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. Installing systems like this could cost between 200 pounds and 3k per kW of energy created.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.

With the bulk of development work in the domestic area, both Plumbers and Electricians are set to capitalise in this area. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.

(C) S. Edwards 2009. Pop to CLICK HERE or Solar Energy Training.